Aptos Solar DNA-120-BF10 460W vs Waaree WS-440
The Aptos Solar DNA-120-BF10 460W wins this comparison by a decisive margin. It delivers more power (460W vs 440W). For most residential installations, the Aptos Solar DNA-120-BF10 460W is the stronger choice.
Key Differences
- • Aptos Solar DNA-120-BF10 460W is rated at 460W while Waaree WS-440 is rated at 440W, a 20W difference.
- • Waaree WS-440 achieves 21.8% efficiency vs 21.26% for the other, a 0.5 percentage point gap.
- • Aptos Solar DNA-120-BF10 460W comes with a 30-year product warranty vs 12 years for the other.
- • Waaree WS-440 has a superior temperature coefficient of -0.3%/°C vs -0.35%/°C, retaining more power in hot climates.
- • Aptos Solar DNA-120-BF10 460W uses PERC Mono Bifacial cells while Waaree WS-440 uses TOPCon N-type cells, representing different technology generations.
Specifications Breakdown
Module Efficiency
The Waaree WS-440 achieves 21.8% module efficiency compared to Aptos Solar DNA-120-BF10 460W's 21.26%, meaning Waaree WS-440 converts 0.5 percentage points more sunlight into electricity per square meter. In practical terms, the Aptos Solar DNA-120-BF10 460W produces 212.6 watts per square meter of panel area while the Waaree WS-440 produces 225.3 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The Aptos Solar DNA-120-BF10 460W delivers 460W per panel versus 440W for the Waaree WS-440, a 20W difference per module. To build an 8 kW residential system, you would need 18 Aptos Solar DNA-120-BF10 460W panels or 19 Waaree WS-440 panels. Choosing the higher-wattage option saves 1 panel, reducing total racking hardware, wiring, and installation labor costs. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
The Waaree WS-440 has a temperature coefficient of -0.3%/°C versus -0.35%/°C for the Aptos Solar DNA-120-BF10 460W. On a hot summer day when cell temperature reaches 65°C (40°C above the 25°C STC baseline), the Waaree WS-440 retains 94.0% of its rated power while the other retains 93.0%. While the numerical gap is modest, it still accumulates over decades of summer production, especially in southern latitudes with prolonged peak heat hours.
Warranty Coverage
The Aptos Solar DNA-120-BF10 460W is backed by a 30-year product warranty and 30-year performance guarantee, while the Waaree WS-440 offers 12-year product and 25-year performance coverage. The Aptos Solar DNA-120-BF10 460W provides 18 additional years of defect protection, covering manufacturing issues, material failures, and premature performance loss. Based on their published degradation rates (1% first year then 0.54%/year for Aptos Solar DNA-120-BF10 460W; 1% first year then 0.4%/year for Waaree WS-440), after 25 years the Aptos Solar DNA-120-BF10 460W should retain approximately 86.0% of original output versus 89.4% for the Waaree WS-440. This 3.4 percentage point gap in end-of-life output meaningfully impacts lifetime energy economics.
Physical Dimensions & Weight
The Aptos Solar DNA-120-BF10 460W measures 1908×1134×35mm and weighs 24.5 kg, while the Waaree WS-440 measures 1722×1134×30mm at 21.5 kg. 2.16 m² of panel area for the Aptos Solar DNA-120-BF10 460W versus 1.95 m² for the Waaree WS-440. The Waaree WS-440 is 3.0 kg lighter per panel, which reduces structural load requirements on the roof and makes handling easier during installation. For a 20-panel system, that is a total weight difference of 60 kg. The more compact Waaree WS-440 may be easier to fit on irregularly shaped or space-limited rooftops.
Specification Comparison
| Specification | Aptos Solar DNA-120-BF10 460W | Waaree WS-440 |
|---|---|---|
| Power | 460W | 440W |
| Efficiency | 21.26% | 21.8% |
| Power Density | 19.8 W/sq ft | 20.9 W/sq ft |
| Cell Type | PERC Mono Bifacial | TOPCon N-type |
| Bifacial | Yes | No |
| Weight | 24.5 kg | 21.5 kg |
| Temp Coefficient | -0.35%/°C | -0.3%/°C |
| Snow Load | 5400 Pa | 5400 Pa |
| Wind Load | 4000 Pa | 2400 Pa |
| Product Warranty | 30 years | 12 years |
| Performance Warranty | 30 years | 25 years |
| Degradation (Year 1) | 1% | 1% |
| Annual Degradation | 0.54% | 0.4% |
| Country | Vietnam | India |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: Waaree WS-440The Waaree WS-440 achieves 21.8% efficiency versus 21.26% — a 0.5 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 0.6 kW more total system capacity, or 3 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: Waaree WS-440The Waaree WS-440 has a better temperature coefficient of -0.3%/°C versus -0.35%/°C. On a 45°C summer day (20°C above STC), the winner retains 94.0% of rated power versus 93.0%. The difference is modest but accumulates over 25 years of summer production.
3. Durability & Warranty
Winner: Aptos Solar DNA-120-BF10 460WAptos Solar DNA-120-BF10 460W leads with a 30-year product warranty versus 12 years. Waaree WS-440 degrades more slowly at 0.4% per year versus 0.54%. After 25 years, expect 86.0% vs 89.4% of original output for Aptos Solar DNA-120-BF10 460W and Waaree WS-440 respectively.
4. Power Output
Winner: Aptos Solar DNA-120-BF10 460WThe Aptos Solar DNA-120-BF10 460W delivers 460W versus 440W per panel — 20W more. For an 8 kW system, you need 18 panels with the higher-wattage option versus 19 panels, saving 1 panels and the associated racking and labor costs.
5. Cell Technology
Winner: Waaree WS-440The Aptos Solar DNA-120-BF10 460W uses PERC Mono Bifacial: PERC (Passivated Emitter Rear Cell) is the current mainstream technology, offering good efficiency at the lowest manufacturing cost. The Waaree WS-440 uses TOPCon N-type: TOPCon (Tunnel Oxide Passivated Contact) adds a thin tunnel oxide layer to reduce recombination losses, achieving higher efficiency than PERC while being manufacturable on existing production lines. TOPCon N-type represents a newer generation technology with a longer performance runway as manufacturing matures.
Aptos Solar DNA-120-BF10 460W
Aptos Solar DNA-120-BF10 is a 460W bifacial panel with up to 30% rear-side energy gain, featuring 120 half-cut cells and DNA patented technology for commercial applications.
Pros
- + Bifacial design with up to 30% additional energy from rear side
- + 460W high output for commercial systems
- + 30-year dual warranty
- + DNA technology improves heat tolerance
Cons
- - Bifacial gain depends on mounting and surface reflectivity
- - Larger format panel
- - Slightly heavier than monofacial variant
Waaree WS-440
The Waaree WS-440 is a 440W residential-format TOPCon N-type panel in the standard 108-cell configuration, manufactured at Waaree's state-of-the-art facilities in Gujarat, India. At 21.8% efficiency, it competes directly with Chinese TOPCon panels while offering Indian supply chain diversification. The standard 1722 x 1134mm form factor ensures compatibility with all major racking systems. Waaree's rapidly expanding US distribution makes this one of the most accessible Indian-made panels in the North American market.
Pros
- + Indian-manufactured — non-Chinese supply chain alternative
- + 21.8% efficiency competitive with Chinese TOPCon leaders
- + Standard 108-cell residential format — universal racking compatibility
- + -0.30%/°C temp coefficient for hot climate performance
- + Highly competitive pricing — among the lowest-cost TOPCon panels
- + Waaree's expanding US distribution improves availability
Cons
- - 12-year product warranty shorter than 25-year leaders
- - Indian manufacturing quality perception still developing vs established brands
- - US installer familiarity and support network still growing
- - No bifacial option in this residential format
Choose Aptos Solar DNA-120-BF10 460W If...
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ Long-term warranty protection is a top priority and you plan to stay in your home for 30+ years
- ✓ Commercial ground-mount and carport installations where bifacial rear-side generation can maximize energy yield.
Choose Waaree WS-440 If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ You live in a hot climate (Arizona, Texas, Florida) where heat performance matters
- ✓ You want maximum output retention over the system's 25-30 year lifespan
- ✓ You prefer newer cell technology with a longer performance improvement runway
- ✓ Cost-conscious residential installers seeking high-efficiency TOPCon panels from a non-Chinese manufacturer at a competitive price point.
Our Recommendation
The Aptos Solar DNA-120-BF10 460W is the decisive winner in this solar panel comparison, outperforming the Waaree WS-440 in 2 of 5 dimensions. Unless you have a specific requirement that the Waaree WS-440 uniquely addresses, the Aptos Solar DNA-120-BF10 460W is the stronger choice for virtually every installation scenario.
Frequently Asked Questions
Which is better, Aptos Solar DNA-120-BF10 460W or Waaree WS-440?
The Aptos Solar DNA-120-BF10 460W wins this comparison by a decisive margin. It delivers more power (460W vs 440W). For most residential installations, the Aptos Solar DNA-120-BF10 460W is the stronger choice.
Which panel is more efficient, Aptos Solar DNA-120-BF10 460W or Waaree WS-440?
The Waaree WS-440 at 21.8% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 0.5 percentage points translates to approximately 20W per panel under standard test conditions.
Which has a better warranty, Aptos Solar DNA-120-BF10 460W or Waaree WS-440?
The Aptos Solar DNA-120-BF10 460W comes with a 30-year product warranty and 30-year performance guarantee. The Waaree WS-440 offers 12-year product and 25-year performance warranties. Aptos Solar DNA-120-BF10 460W provides 18 additional years of product coverage.
Which panel performs better in hot weather?
The Aptos Solar DNA-120-BF10 460W has a temperature coefficient of -0.35%/°C and the Waaree WS-440 is -0.3%/°C. Waaree WS-440 retains more power in heat — important in states like Arizona, Texas, and Florida. A lower (less negative) temperature coefficient is better.
How many Aptos Solar DNA-120-BF10 460W vs Waaree WS-440 panels do I need for an 8 kW system?
For an 8 kW system: you need 18 Aptos Solar DNA-120-BF10 460W panels (460W each) or 19 Waaree WS-440 panels (440W each). The Aptos Solar DNA-120-BF10 460W requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026