Aptos Solar DNA-120-BF26 370W vs Hyundai HiE-S420VG
The Hyundai HiE-S420VG wins this comparison by a decisive margin. It leads in efficiency (21.5% vs 20.28%) and matches or exceeds on warranty (25 vs 25 years). For most residential installations, the Hyundai HiE-S420VG is the stronger choice.
Key Differences
- • Aptos Solar DNA-120-BF26 370W is rated at 370W while Hyundai HiE-S420VG is rated at 420W, a 50W difference.
- • Hyundai HiE-S420VG achieves 21.5% efficiency vs 20.28% for the other, a 1.2 percentage point gap.
- • Both carry matching 25-year product warranties.
- • Hyundai HiE-S420VG has a superior temperature coefficient of -0.3%/°C vs -0.36%/°C, retaining more power in hot climates.
- • Aptos Solar DNA-120-BF26 370W uses PERC Mono Bifacial cells while Hyundai HiE-S420VG uses TOPCon N-type cells, representing different technology generations.
Specifications Breakdown
Module Efficiency
The Hyundai HiE-S420VG achieves 21.5% module efficiency compared to Aptos Solar DNA-120-BF26 370W's 20.28%, meaning Hyundai HiE-S420VG converts 1.2 percentage points more sunlight into electricity per square meter. In practical terms, the Aptos Solar DNA-120-BF26 370W produces 200.4 watts per square meter of panel area while the Hyundai HiE-S420VG produces 215.1 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The Hyundai HiE-S420VG delivers 420W per panel versus 370W for the Aptos Solar DNA-120-BF26 370W, a 50W difference per module. To build an 8 kW residential system, you would need 22 Aptos Solar DNA-120-BF26 370W panels or 20 Hyundai HiE-S420VG panels. Choosing the higher-wattage option saves 2 panels, reducing total racking hardware, wiring, and installation labor costs. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
The Hyundai HiE-S420VG has a temperature coefficient of -0.3%/°C versus -0.36%/°C for the Aptos Solar DNA-120-BF26 370W. On a hot summer day when cell temperature reaches 65°C (40°C above the 25°C STC baseline), the Hyundai HiE-S420VG retains 94.0% of its rated power while the other retains 92.8%. This difference is particularly significant in hot climates such as the American Southwest, the Middle East, and Southeast Asia, where panels routinely operate 30-40°C above STC for several hours each day. Over the system lifetime, the cumulative energy advantage from a better temperature coefficient can amount to 2-4% of total production.
Warranty Coverage
The Aptos Solar DNA-120-BF26 370W is backed by a 25-year product warranty and 30-year performance guarantee, while the Hyundai HiE-S420VG offers 25-year product and 25-year performance coverage. Both offer identical product warranty duration. Based on their published degradation rates (1% first year then 0.54%/year for Aptos Solar DNA-120-BF26 370W; 1% first year then 0.4%/year for Hyundai HiE-S420VG), after 25 years the Aptos Solar DNA-120-BF26 370W should retain approximately 86.0% of original output versus 89.4% for the Hyundai HiE-S420VG. This 3.4 percentage point gap in end-of-life output meaningfully impacts lifetime energy economics.
Physical Dimensions & Weight
The Aptos Solar DNA-120-BF26 370W measures 1762×1048×35mm and weighs 20.5 kg, while the Hyundai HiE-S420VG measures 1722×1134×30mm at 21 kg. 1.85 m² of panel area for the Aptos Solar DNA-120-BF26 370W versus 1.95 m² for the Hyundai HiE-S420VG. Their weights are closely matched, so neither panel imposes a significantly different structural load on the mounting system. The more compact Aptos Solar DNA-120-BF26 370W may be easier to fit on irregularly shaped or space-limited rooftops.
Specification Comparison
| Specification | Aptos Solar DNA-120-BF26 370W | Hyundai HiE-S420VG |
|---|---|---|
| Power | 370W | 420W |
| Efficiency | 20.28% | 21.5% |
| Power Density | 18.6 W/sq ft | 20.0 W/sq ft |
| Cell Type | PERC Mono Bifacial | TOPCon N-type |
| Bifacial | Yes | No |
| Weight | 20.5 kg | 21 kg |
| Temp Coefficient | -0.36%/°C | -0.3%/°C |
| Snow Load | 5400 Pa | 5400 Pa |
| Wind Load | 4000 Pa | 2400 Pa |
| Product Warranty | 25 years | 25 years |
| Performance Warranty | 30 years | 25 years |
| Degradation (Year 1) | 1% | 1% |
| Annual Degradation | 0.54% | 0.4% |
| Country | Vietnam | South Korea |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: Hyundai HiE-S420VGThe Hyundai HiE-S420VG achieves 21.5% efficiency versus 20.28% — a 1.2 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 1.5 kW more total system capacity, or 7 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: Hyundai HiE-S420VGThe Hyundai HiE-S420VG has a better temperature coefficient of -0.3%/°C versus -0.36%/°C. On a 45°C summer day (20°C above STC), the winner retains 94.0% of rated power versus 92.8%. This is a meaningful difference in hot states like Arizona, Texas, and Florida.
3. Durability & Warranty
Winner: Hyundai HiE-S420VGHyundai HiE-S420VG degrades more slowly at 0.4% per year versus 0.54%. After 25 years, expect 86.0% vs 89.4% of original output for Aptos Solar DNA-120-BF26 370W and Hyundai HiE-S420VG respectively.
4. Power Output
Winner: Hyundai HiE-S420VGThe Hyundai HiE-S420VG delivers 420W versus 370W per panel — 50W more. For an 8 kW system, you need 20 panels with the higher-wattage option versus 22 panels, saving 2 panels and the associated racking and labor costs.
5. Cell Technology
Winner: Hyundai HiE-S420VGThe Aptos Solar DNA-120-BF26 370W uses PERC Mono Bifacial: PERC (Passivated Emitter Rear Cell) is the current mainstream technology, offering good efficiency at the lowest manufacturing cost. The Hyundai HiE-S420VG uses TOPCon N-type: TOPCon (Tunnel Oxide Passivated Contact) adds a thin tunnel oxide layer to reduce recombination losses, achieving higher efficiency than PERC while being manufacturable on existing production lines. TOPCon N-type represents a newer generation technology with a longer performance runway as manufacturing matures.
Aptos Solar DNA-120-BF26 370W
Aptos Solar DNA-120-BF26 is a 370W bifacial all-black panel with up to 30% rear-side energy gain, ideal for residential installations seeking extra output.
Pros
- + Bifacial design for up to 30% additional rear-side energy
- + All-black aesthetic
- + Lightweight and easy to install
- + 30-year performance warranty
Cons
- - Lower 370W base output
- - Bifacial gain requires proper mounting conditions
- - 20.28% efficiency below top-tier panels
Hyundai HiE-S420VG
The Hyundai HiE-S420VG is a 420W residential-format TOPCon N-type panel in the popular 108-cell configuration (1722 x 1134mm), matching the most common residential panel size for easy racking and roof fit. Korean manufacturing provides supply chain diversification, and the TOPCon N-type cells deliver better temperature performance (-0.30%/°C) and lower degradation than PERC alternatives. The standard residential form factor ensures compatibility with all major racking systems.
Pros
- + Standard 108-cell residential size — fits any racking system
- + Korean-made TOPCon N-type with 21.5% efficiency
- + -0.30%/°C temperature coefficient for hot climate performance
- + 25+25 year warranty backed by Hyundai corporate
- + Non-Chinese manufacturing for tariff and UFLPA considerations
- + 420W competitive output in standard residential format
Cons
- - 420W is competitive but not class-leading for 108-cell panels
- - Slightly higher per-watt cost than Chinese equivalents
- - Smaller US installer network and distribution
- - Less brand recognition in solar market despite Hyundai name
Choose Aptos Solar DNA-120-BF26 370W If...
- ✓ Homeowners with elevated mounting or reflective surfaces who want an aesthetically pleasing bifacial panel.
Choose Hyundai HiE-S420VG If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ You live in a hot climate (Arizona, Texas, Florida) where heat performance matters
- ✓ You want maximum output retention over the system's 25-30 year lifespan
- ✓ You prefer newer cell technology with a longer performance improvement runway
Our Recommendation
The Hyundai HiE-S420VG is the decisive winner in this solar panel comparison, outperforming the Aptos Solar DNA-120-BF26 370W in 5 of 5 dimensions. Unless you have a specific requirement that the Aptos Solar DNA-120-BF26 370W uniquely addresses, the Hyundai HiE-S420VG is the stronger choice for virtually every installation scenario.
Frequently Asked Questions
Which is better, Aptos Solar DNA-120-BF26 370W or Hyundai HiE-S420VG?
The Hyundai HiE-S420VG wins this comparison by a decisive margin. It leads in efficiency (21.5% vs 20.28%) and matches or exceeds on warranty (25 vs 25 years). For most residential installations, the Hyundai HiE-S420VG is the stronger choice.
Which panel is more efficient, Aptos Solar DNA-120-BF26 370W or Hyundai HiE-S420VG?
The Hyundai HiE-S420VG at 21.5% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 1.2 percentage points translates to approximately 50W per panel under standard test conditions.
Which has a better warranty, Aptos Solar DNA-120-BF26 370W or Hyundai HiE-S420VG?
The Aptos Solar DNA-120-BF26 370W comes with a 25-year product warranty and 30-year performance guarantee. The Hyundai HiE-S420VG offers 25-year product and 25-year performance warranties. Both offer identical warranty terms.
Which panel performs better in hot weather?
The Aptos Solar DNA-120-BF26 370W has a temperature coefficient of -0.36%/°C and the Hyundai HiE-S420VG is -0.3%/°C. Hyundai HiE-S420VG retains more power in heat — important in states like Arizona, Texas, and Florida. A lower (less negative) temperature coefficient is better.
How many Aptos Solar DNA-120-BF26 370W vs Hyundai HiE-S420VG panels do I need for an 8 kW system?
For an 8 kW system: you need 22 Aptos Solar DNA-120-BF26 370W panels (370W each) or 20 Hyundai HiE-S420VG panels (420W each). The Hyundai HiE-S420VG requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026