JA Solar JAM54S31 415W vs Seraphim SRP-445-BMA-HV
The Seraphim SRP-445-BMA-HV wins this comparison by a decisive margin. It leads in efficiency (22% vs 21.5%) and matches or exceeds on warranty (15 vs 12 years). For most residential installations, the Seraphim SRP-445-BMA-HV is the stronger choice.
Key Differences
- • JA Solar JAM54S31 415W is rated at 415W while Seraphim SRP-445-BMA-HV is rated at 445W, a 30W difference.
- • Seraphim SRP-445-BMA-HV achieves 22% efficiency vs 21.5% for the other, a 0.5 percentage point gap.
- • Seraphim SRP-445-BMA-HV comes with a 15-year product warranty vs 12 years for the other.
- • Seraphim SRP-445-BMA-HV has a superior temperature coefficient of -0.29%/°C vs -0.34%/°C, retaining more power in hot climates.
- • JA Solar JAM54S31 415W uses PERC Mono cells while Seraphim SRP-445-BMA-HV uses TOPCon N-type cells, representing different technology generations.
Specifications Breakdown
Module Efficiency
The Seraphim SRP-445-BMA-HV achieves 22% module efficiency compared to JA Solar JAM54S31 415W's 21.5%, meaning Seraphim SRP-445-BMA-HV converts 0.5 percentage points more sunlight into electricity per square meter. In practical terms, the JA Solar JAM54S31 415W produces 212.5 watts per square meter of panel area while the Seraphim SRP-445-BMA-HV produces 227.9 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The Seraphim SRP-445-BMA-HV delivers 445W per panel versus 415W for the JA Solar JAM54S31 415W, a 30W difference per module. To build an 8 kW residential system, you would need 20 JA Solar JAM54S31 415W panels or 18 Seraphim SRP-445-BMA-HV panels. Choosing the higher-wattage option saves 2 panels, reducing total racking hardware, wiring, and installation labor costs. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
The Seraphim SRP-445-BMA-HV has a temperature coefficient of -0.29%/°C versus -0.34%/°C for the JA Solar JAM54S31 415W. On a hot summer day when cell temperature reaches 65°C (40°C above the 25°C STC baseline), the Seraphim SRP-445-BMA-HV retains 94.2% of its rated power while the other retains 93.2%. This difference is particularly significant in hot climates such as the American Southwest, the Middle East, and Southeast Asia, where panels routinely operate 30-40°C above STC for several hours each day. Over the system lifetime, the cumulative energy advantage from a better temperature coefficient can amount to 2-4% of total production.
Warranty Coverage
The JA Solar JAM54S31 415W is backed by a 12-year product warranty and 25-year performance guarantee, while the Seraphim SRP-445-BMA-HV offers 15-year product and 30-year performance coverage. The Seraphim SRP-445-BMA-HV provides 3 additional years of defect protection, covering manufacturing issues, material failures, and premature performance loss. Based on their published degradation rates (1.5% first year then 0.5%/year for JA Solar JAM54S31 415W; 1% first year then 0.4%/year for Seraphim SRP-445-BMA-HV), after 25 years the JA Solar JAM54S31 415W should retain approximately 86.5% of original output versus 89.4% for the Seraphim SRP-445-BMA-HV. This 2.9 percentage point gap in end-of-life output meaningfully impacts lifetime energy economics.
Physical Dimensions & Weight
The JA Solar JAM54S31 415W measures 1722×1134×30mm and weighs 21.5 kg, while the Seraphim SRP-445-BMA-HV measures 1722×1134×30mm at 21.5 kg. 1.95 m² of panel area for the JA Solar JAM54S31 415W versus 1.95 m² for the Seraphim SRP-445-BMA-HV. Their weights are closely matched, so neither panel imposes a significantly different structural load on the mounting system. Similar footprints mean both panels fit comparably on standard residential rooftop configurations.
Specification Comparison
| Specification | JA Solar JAM54S31 415W | Seraphim SRP-445-BMA-HV |
|---|---|---|
| Power | 415W | 445W |
| Efficiency | 21.5% | 22% |
| Power Density | 19.7 W/sq ft | 21.2 W/sq ft |
| Cell Type | PERC Mono | TOPCon N-type |
| Bifacial | No | No |
| Weight | 21.5 kg | 21.5 kg |
| Temp Coefficient | -0.34%/°C | -0.29%/°C |
| Snow Load | 5400 Pa | 5400 Pa |
| Wind Load | 2400 Pa | 2400 Pa |
| Product Warranty | 12 years | 15 years |
| Performance Warranty | 25 years | 30 years |
| Degradation (Year 1) | 1.5% | 1% |
| Annual Degradation | 0.5% | 0.4% |
| Country | China | China |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: Seraphim SRP-445-BMA-HVThe Seraphim SRP-445-BMA-HV achieves 22% efficiency versus 21.5% — a 0.5 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 0.9 kW more total system capacity, or 5 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: Seraphim SRP-445-BMA-HVThe Seraphim SRP-445-BMA-HV has a better temperature coefficient of -0.29%/°C versus -0.34%/°C. On a 45°C summer day (20°C above STC), the winner retains 94.2% of rated power versus 93.2%. This is a meaningful difference in hot states like Arizona, Texas, and Florida.
3. Durability & Warranty
Winner: Seraphim SRP-445-BMA-HVSeraphim SRP-445-BMA-HV leads with a 15-year product warranty versus 12 years. Seraphim SRP-445-BMA-HV degrades more slowly at 0.4% per year versus 0.5%. After 25 years, expect 86.5% vs 89.4% of original output for JA Solar JAM54S31 415W and Seraphim SRP-445-BMA-HV respectively.
4. Power Output
Winner: Seraphim SRP-445-BMA-HVThe Seraphim SRP-445-BMA-HV delivers 445W versus 415W per panel — 30W more. For an 8 kW system, you need 18 panels with the higher-wattage option versus 20 panels, saving 2 panels and the associated racking and labor costs.
5. Cell Technology
Winner: Seraphim SRP-445-BMA-HVThe JA Solar JAM54S31 415W uses PERC Mono: PERC (Passivated Emitter Rear Cell) is the current mainstream technology, offering good efficiency at the lowest manufacturing cost. The Seraphim SRP-445-BMA-HV uses TOPCon N-type: TOPCon (Tunnel Oxide Passivated Contact) adds a thin tunnel oxide layer to reduce recombination losses, achieving higher efficiency than PERC while being manufacturable on existing production lines. TOPCon N-type represents a newer generation technology with a longer performance runway as manufacturing matures.
JA Solar JAM54S31 415W
The JAM54S31 is a compact residential PERC panel delivering 415W with a solid balance of performance and affordability.
Pros
- + Compact residential form factor
- + Good price-performance ratio
- + Widely available
- + Proven reliability
Cons
- - Lower efficiency vs N-type
- - Higher degradation rate
- - Standard warranty
Seraphim SRP-445-BMA-HV
Seraphim SRP-445-BMA-HV is an all-black N-type TOPCon panel delivering 445W with clean aesthetics for residential installations.
Pros
- + All-black aesthetics
- + N-type TOPCon technology
- + Compact residential format
- + Competitive pricing
Cons
- - Less known in US market
- - Limited installer base
- - Standard warranty
Choose JA Solar JAM54S31 415W If...
- ✓ Budget residential installations seeking reliable PERC performance.
Choose Seraphim SRP-445-BMA-HV If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ Long-term warranty protection is a top priority and you plan to stay in your home for 15+ years
- ✓ You live in a hot climate (Arizona, Texas, Florida) where heat performance matters
- ✓ You want maximum output retention over the system's 25-30 year lifespan
Our Recommendation
The Seraphim SRP-445-BMA-HV is the decisive winner in this solar panel comparison, outperforming the JA Solar JAM54S31 415W in 5 of 5 dimensions. Unless you have a specific requirement that the JA Solar JAM54S31 415W uniquely addresses, the Seraphim SRP-445-BMA-HV is the stronger choice for virtually every installation scenario.
Frequently Asked Questions
Which is better, JA Solar JAM54S31 415W or Seraphim SRP-445-BMA-HV?
The Seraphim SRP-445-BMA-HV wins this comparison by a decisive margin. It leads in efficiency (22% vs 21.5%) and matches or exceeds on warranty (15 vs 12 years). For most residential installations, the Seraphim SRP-445-BMA-HV is the stronger choice.
Which panel is more efficient, JA Solar JAM54S31 415W or Seraphim SRP-445-BMA-HV?
The Seraphim SRP-445-BMA-HV at 22% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 0.5 percentage points translates to approximately 30W per panel under standard test conditions.
Which has a better warranty, JA Solar JAM54S31 415W or Seraphim SRP-445-BMA-HV?
The JA Solar JAM54S31 415W comes with a 12-year product warranty and 25-year performance guarantee. The Seraphim SRP-445-BMA-HV offers 15-year product and 30-year performance warranties. Seraphim SRP-445-BMA-HV provides 3 additional years of product coverage.
Which panel performs better in hot weather?
The JA Solar JAM54S31 415W has a temperature coefficient of -0.34%/°C and the Seraphim SRP-445-BMA-HV is -0.29%/°C. Seraphim SRP-445-BMA-HV retains more power in heat — important in states like Arizona, Texas, and Florida. A lower (less negative) temperature coefficient is better.
How many JA Solar JAM54S31 415W vs Seraphim SRP-445-BMA-HV panels do I need for an 8 kW system?
For an 8 kW system: you need 20 JA Solar JAM54S31 415W panels (415W each) or 18 Seraphim SRP-445-BMA-HV panels (445W each). The Seraphim SRP-445-BMA-HV requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026