Maxeon Maxeon 3 410W vs Silfab SIL-370-BK 370W
The Maxeon Maxeon 3 410W wins this comparison by a decisive margin. It leads in efficiency (22.2% vs 20.4%) and matches or exceeds on warranty (25 vs 25 years). For most residential installations, the Maxeon Maxeon 3 410W is the stronger choice.
Key Differences
- • Maxeon Maxeon 3 410W is rated at 410W while Silfab SIL-370-BK 370W is rated at 370W, a 40W difference.
- • Maxeon Maxeon 3 410W achieves 22.2% efficiency vs 20.4% for the other, a 1.8 percentage point gap.
- • Both carry matching 25-year product warranties.
- • Maxeon Maxeon 3 410W has a superior temperature coefficient of -0.27%/°C vs -0.35%/°C, retaining more power in hot climates.
- • Maxeon Maxeon 3 410W uses IBC (Interdigitated Back Contact) cells while Silfab SIL-370-BK 370W uses PERC Mono cells, representing different technology generations.
Specifications Breakdown
Module Efficiency
The Maxeon Maxeon 3 410W achieves 22.2% module efficiency compared to Silfab SIL-370-BK 370W's 20.4%, meaning Maxeon Maxeon 3 410W converts 1.8 percentage points more sunlight into electricity per square meter. In practical terms, the Maxeon Maxeon 3 410W produces 222.7 watts per square meter of panel area while the Silfab SIL-370-BK 370W produces 189.5 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The Maxeon Maxeon 3 410W delivers 410W per panel versus 370W for the Silfab SIL-370-BK 370W, a 40W difference per module. To build an 8 kW residential system, you would need 20 Maxeon Maxeon 3 410W panels or 22 Silfab SIL-370-BK 370W panels. Choosing the higher-wattage option saves 2 panels, reducing total racking hardware, wiring, and installation labor costs. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
The Maxeon Maxeon 3 410W has a temperature coefficient of -0.27%/°C versus -0.35%/°C for the Silfab SIL-370-BK 370W. On a hot summer day when cell temperature reaches 65°C (40°C above the 25°C STC baseline), the Maxeon Maxeon 3 410W retains 94.6% of its rated power while the other retains 93.0%. This difference is particularly significant in hot climates such as the American Southwest, the Middle East, and Southeast Asia, where panels routinely operate 30-40°C above STC for several hours each day. Over the system lifetime, the cumulative energy advantage from a better temperature coefficient can amount to 2-4% of total production.
Warranty Coverage
The Maxeon Maxeon 3 410W is backed by a 25-year product warranty and 25-year performance guarantee, while the Silfab SIL-370-BK 370W offers 25-year product and 25-year performance coverage. Both offer identical product warranty duration. Based on their published degradation rates (0.25% first year then 0.25%/year for Maxeon Maxeon 3 410W; 1% first year then 0.4%/year for Silfab SIL-370-BK 370W), after 25 years the Maxeon Maxeon 3 410W should retain approximately 93.8% of original output versus 89.4% for the Silfab SIL-370-BK 370W. This 4.4 percentage point gap in end-of-life output meaningfully impacts lifetime energy economics.
Physical Dimensions & Weight
The Maxeon Maxeon 3 410W measures 1812×1016×30mm and weighs 19 kg, while the Silfab SIL-370-BK 370W measures 1722×1134×30mm at 19.5 kg. 1.84 m² of panel area for the Maxeon Maxeon 3 410W versus 1.95 m² for the Silfab SIL-370-BK 370W. Their weights are closely matched, so neither panel imposes a significantly different structural load on the mounting system. The more compact Maxeon Maxeon 3 410W may be easier to fit on irregularly shaped or space-limited rooftops.
Specification Comparison
| Specification | Maxeon Maxeon 3 410W | Silfab SIL-370-BK 370W |
|---|---|---|
| Power | 410W | 370W |
| Efficiency | 22.2% | 20.4% |
| Power Density | 20.7 W/sq ft | 17.6 W/sq ft |
| Cell Type | IBC (Interdigitated Back Contact) | PERC Mono |
| Bifacial | Yes | No |
| Weight | 19 kg | 19.5 kg |
| Temp Coefficient | -0.27%/°C | -0.35%/°C |
| Snow Load | 5400 Pa | 2400 Pa |
| Wind Load | 3600 Pa | 2400 Pa |
| Product Warranty | 25 years | 25 years |
| Performance Warranty | 25 years | 25 years |
| Degradation (Year 1) | 0.25% | 1% |
| Annual Degradation | 0.25% | 0.4% |
| Country | Mexico | United States |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: Maxeon Maxeon 3 410WThe Maxeon Maxeon 3 410W achieves 22.2% efficiency versus 20.4% — a 1.8 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 1.2 kW more total system capacity, or 6 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: Maxeon Maxeon 3 410WThe Maxeon Maxeon 3 410W has a better temperature coefficient of -0.27%/°C versus -0.35%/°C. On a 45°C summer day (20°C above STC), the winner retains 94.6% of rated power versus 93.0%. This is a meaningful difference in hot states like Arizona, Texas, and Florida.
3. Durability & Warranty
Winner: Maxeon Maxeon 3 410WMaxeon Maxeon 3 410W degrades more slowly at 0.25% per year versus 0.4%. After 25 years, expect 93.8% vs 89.4% of original output for Maxeon Maxeon 3 410W and Silfab SIL-370-BK 370W respectively.
4. Power Output
Winner: Maxeon Maxeon 3 410WThe Maxeon Maxeon 3 410W delivers 410W versus 370W per panel — 40W more. For an 8 kW system, you need 20 panels with the higher-wattage option versus 22 panels, saving 2 panels and the associated racking and labor costs.
5. Cell Technology
Winner: Maxeon Maxeon 3 410WThe Maxeon Maxeon 3 410W uses IBC (Interdigitated Back Contact): IBC (Interdigitated Back Contact) moves all electrical contacts to the rear of the cell, maximizing front-side light capture for the highest possible efficiency. The Silfab SIL-370-BK 370W uses PERC Mono: PERC (Passivated Emitter Rear Cell) is the current mainstream technology, offering good efficiency at the lowest manufacturing cost. IBC (Interdigitated Back Contact) represents a newer generation technology with a longer performance runway as manufacturing matures.
Maxeon Maxeon 3 410W
The Maxeon 3 (formerly SunPower) delivers 410W with IBC technology and a proven 25-year warranty track record. Note: this is a discontinued/legacy model being phased out in favor of newer Maxeon series.
Pros
- + Proven IBC technology
- + 25-year comprehensive warranty
- + Excellent real-world performance
- + Lightweight design
Cons
- - Discontinued/legacy model
- - Higher cost than conventional panels
- - Limited future support and availability
Silfab SIL-370-BK 370W
The SIL-370-BK is Silfab's entry-level US-made all-black panel delivering 370W for budget-conscious domestic installations.
Pros
- + Made in USA
- + All-black design
- + 25-year warranty
- + ARRA compliant
Cons
- - Lower wattage
- - Basic PERC technology
- - Less competitive efficiency
Choose Maxeon Maxeon 3 410W If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ You live in a hot climate (Arizona, Texas, Florida) where heat performance matters
- ✓ You want maximum output retention over the system's 25-30 year lifespan
- ✓ Those wanting a proven premium panel with established track record (while supplies last).
Choose Silfab SIL-370-BK 370W If...
- ✓ Government or institutional projects requiring ARRA/Buy America compliance.
Our Recommendation
The Maxeon Maxeon 3 410W is the decisive winner in this solar panel comparison, outperforming the Silfab SIL-370-BK 370W in 5 of 5 dimensions. Unless you have a specific requirement that the Silfab SIL-370-BK 370W uniquely addresses, the Maxeon Maxeon 3 410W is the stronger choice for virtually every installation scenario.
Frequently Asked Questions
Which is better, Maxeon Maxeon 3 410W or Silfab SIL-370-BK 370W?
The Maxeon Maxeon 3 410W wins this comparison by a decisive margin. It leads in efficiency (22.2% vs 20.4%) and matches or exceeds on warranty (25 vs 25 years). For most residential installations, the Maxeon Maxeon 3 410W is the stronger choice.
Which panel is more efficient, Maxeon Maxeon 3 410W or Silfab SIL-370-BK 370W?
The Maxeon Maxeon 3 410W at 22.2% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 1.8 percentage points translates to approximately 40W per panel under standard test conditions.
Which has a better warranty, Maxeon Maxeon 3 410W or Silfab SIL-370-BK 370W?
The Maxeon Maxeon 3 410W comes with a 25-year product warranty and 25-year performance guarantee. The Silfab SIL-370-BK 370W offers 25-year product and 25-year performance warranties. Both offer identical warranty terms.
Which panel performs better in hot weather?
The Maxeon Maxeon 3 410W has a temperature coefficient of -0.27%/°C and the Silfab SIL-370-BK 370W is -0.35%/°C. Maxeon Maxeon 3 410W retains more power in heat — important in states like Arizona, Texas, and Florida. A lower (less negative) temperature coefficient is better.
How many Maxeon Maxeon 3 410W vs Silfab SIL-370-BK 370W panels do I need for an 8 kW system?
For an 8 kW system: you need 20 Maxeon Maxeon 3 410W panels (410W each) or 22 Silfab SIL-370-BK 370W panels (370W each). The Maxeon Maxeon 3 410W requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026