Maxeon Maxeon 3 410W vs Seraphim SRP-445-BMA-HV
The Maxeon Maxeon 3 410W wins this comparison by a decisive margin. It leads in efficiency (22.2% vs 22%) and matches or exceeds on warranty (25 vs 15 years). For most residential installations, the Maxeon Maxeon 3 410W is the stronger choice.
Key Differences
- • Maxeon Maxeon 3 410W is rated at 410W while Seraphim SRP-445-BMA-HV is rated at 445W, a 35W difference.
- • Maxeon Maxeon 3 410W achieves 22.2% efficiency vs 22% for the other, a 0.2 percentage point gap.
- • Maxeon Maxeon 3 410W comes with a 25-year product warranty vs 15 years for the other.
- • Maxeon Maxeon 3 410W has a superior temperature coefficient of -0.27%/°C vs -0.29%/°C, retaining more power in hot climates.
- • Maxeon Maxeon 3 410W uses IBC (Interdigitated Back Contact) cells while Seraphim SRP-445-BMA-HV uses TOPCon N-type cells, representing different technology generations.
Specifications Breakdown
Module Efficiency
The Maxeon Maxeon 3 410W achieves 22.2% module efficiency compared to Seraphim SRP-445-BMA-HV's 22%, meaning Maxeon Maxeon 3 410W converts 0.2 percentage points more sunlight into electricity per square meter. In practical terms, the Maxeon Maxeon 3 410W produces 222.7 watts per square meter of panel area while the Seraphim SRP-445-BMA-HV produces 227.9 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The Seraphim SRP-445-BMA-HV delivers 445W per panel versus 410W for the Maxeon Maxeon 3 410W, a 35W difference per module. To build an 8 kW residential system, you would need 20 Maxeon Maxeon 3 410W panels or 18 Seraphim SRP-445-BMA-HV panels. Choosing the higher-wattage option saves 2 panels, reducing total racking hardware, wiring, and installation labor costs. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
The Maxeon Maxeon 3 410W has a temperature coefficient of -0.27%/°C versus -0.29%/°C for the Seraphim SRP-445-BMA-HV. On a hot summer day when cell temperature reaches 65°C (40°C above the 25°C STC baseline), the Maxeon Maxeon 3 410W retains 94.6% of its rated power while the other retains 94.2%. While the numerical gap is modest, it still accumulates over decades of summer production, especially in southern latitudes with prolonged peak heat hours.
Warranty Coverage
The Maxeon Maxeon 3 410W is backed by a 25-year product warranty and 25-year performance guarantee, while the Seraphim SRP-445-BMA-HV offers 15-year product and 30-year performance coverage. The Maxeon Maxeon 3 410W provides 10 additional years of defect protection, covering manufacturing issues, material failures, and premature performance loss. Based on their published degradation rates (0.25% first year then 0.25%/year for Maxeon Maxeon 3 410W; 1% first year then 0.4%/year for Seraphim SRP-445-BMA-HV), after 25 years the Maxeon Maxeon 3 410W should retain approximately 93.8% of original output versus 89.4% for the Seraphim SRP-445-BMA-HV. This 4.4 percentage point gap in end-of-life output meaningfully impacts lifetime energy economics.
Physical Dimensions & Weight
The Maxeon Maxeon 3 410W measures 1812×1016×30mm and weighs 19 kg, while the Seraphim SRP-445-BMA-HV measures 1722×1134×30mm at 21.5 kg. 1.84 m² of panel area for the Maxeon Maxeon 3 410W versus 1.95 m² for the Seraphim SRP-445-BMA-HV. The Maxeon Maxeon 3 410W is 2.5 kg lighter per panel, which reduces structural load requirements on the roof and makes handling easier during installation. For a 20-panel system, that is a total weight difference of 50 kg. The more compact Maxeon Maxeon 3 410W may be easier to fit on irregularly shaped or space-limited rooftops.
Specification Comparison
| Specification | Maxeon Maxeon 3 410W | Seraphim SRP-445-BMA-HV |
|---|---|---|
| Power | 410W | 445W |
| Efficiency | 22.2% | 22% |
| Power Density | 20.7 W/sq ft | 21.2 W/sq ft |
| Cell Type | IBC (Interdigitated Back Contact) | TOPCon N-type |
| Bifacial | Yes | No |
| Weight | 19 kg | 21.5 kg |
| Temp Coefficient | -0.27%/°C | -0.29%/°C |
| Snow Load | 5400 Pa | 5400 Pa |
| Wind Load | 3600 Pa | 2400 Pa |
| Product Warranty | 25 years | 15 years |
| Performance Warranty | 25 years | 30 years |
| Degradation (Year 1) | 0.25% | 1% |
| Annual Degradation | 0.25% | 0.4% |
| Country | Mexico | China |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: Maxeon Maxeon 3 410WThe Maxeon Maxeon 3 410W achieves 22.2% efficiency versus 22% — a 0.2 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 1.1 kW more total system capacity, or 5 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: Maxeon Maxeon 3 410WThe Maxeon Maxeon 3 410W has a better temperature coefficient of -0.27%/°C versus -0.29%/°C. On a 45°C summer day (20°C above STC), the winner retains 94.6% of rated power versus 94.2%. The difference is modest but accumulates over 25 years of summer production.
3. Durability & Warranty
Winner: Maxeon Maxeon 3 410WMaxeon Maxeon 3 410W leads with a 25-year product warranty versus 15 years. Maxeon Maxeon 3 410W degrades more slowly at 0.25% per year versus 0.4%. After 25 years, expect 93.8% vs 89.4% of original output for Maxeon Maxeon 3 410W and Seraphim SRP-445-BMA-HV respectively.
4. Power Output
Winner: Seraphim SRP-445-BMA-HVThe Seraphim SRP-445-BMA-HV delivers 445W versus 410W per panel — 35W more. For an 8 kW system, you need 18 panels with the higher-wattage option versus 20 panels, saving 2 panels and the associated racking and labor costs.
5. Cell Technology
Winner: Maxeon Maxeon 3 410WThe Maxeon Maxeon 3 410W uses IBC (Interdigitated Back Contact): IBC (Interdigitated Back Contact) moves all electrical contacts to the rear of the cell, maximizing front-side light capture for the highest possible efficiency. The Seraphim SRP-445-BMA-HV uses TOPCon N-type: TOPCon (Tunnel Oxide Passivated Contact) adds a thin tunnel oxide layer to reduce recombination losses, achieving higher efficiency than PERC while being manufacturable on existing production lines. IBC (Interdigitated Back Contact) represents a newer generation technology with a longer performance runway as manufacturing matures.
Maxeon Maxeon 3 410W
The Maxeon 3 (formerly SunPower) delivers 410W with IBC technology and a proven 25-year warranty track record. Note: this is a discontinued/legacy model being phased out in favor of newer Maxeon series.
Pros
- + Proven IBC technology
- + 25-year comprehensive warranty
- + Excellent real-world performance
- + Lightweight design
Cons
- - Discontinued/legacy model
- - Higher cost than conventional panels
- - Limited future support and availability
Seraphim SRP-445-BMA-HV
Seraphim SRP-445-BMA-HV is an all-black N-type TOPCon panel delivering 445W with clean aesthetics for residential installations.
Pros
- + All-black aesthetics
- + N-type TOPCon technology
- + Compact residential format
- + Competitive pricing
Cons
- - Less known in US market
- - Limited installer base
- - Standard warranty
Choose Maxeon Maxeon 3 410W If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ Long-term warranty protection is a top priority and you plan to stay in your home for 25+ years
- ✓ You live in a hot climate (Arizona, Texas, Florida) where heat performance matters
- ✓ You want maximum output retention over the system's 25-30 year lifespan
- ✓ Those wanting a proven premium panel with established track record (while supplies last).
Choose Seraphim SRP-445-BMA-HV If...
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ You prefer newer cell technology with a longer performance improvement runway
- ✓ Aesthetics-focused homeowners wanting all-black N-type panels at a good price.
Our Recommendation
The Maxeon Maxeon 3 410W is the decisive winner in this solar panel comparison, outperforming the Seraphim SRP-445-BMA-HV in 4 of 5 dimensions. Unless you have a specific requirement that the Seraphim SRP-445-BMA-HV uniquely addresses, the Maxeon Maxeon 3 410W is the stronger choice for virtually every installation scenario.
Frequently Asked Questions
Which is better, Maxeon Maxeon 3 410W or Seraphim SRP-445-BMA-HV?
The Maxeon Maxeon 3 410W wins this comparison by a decisive margin. It leads in efficiency (22.2% vs 22%) and matches or exceeds on warranty (25 vs 15 years). For most residential installations, the Maxeon Maxeon 3 410W is the stronger choice.
Which panel is more efficient, Maxeon Maxeon 3 410W or Seraphim SRP-445-BMA-HV?
The Maxeon Maxeon 3 410W at 22.2% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 0.2 percentage points translates to approximately 35W per panel under standard test conditions.
Which has a better warranty, Maxeon Maxeon 3 410W or Seraphim SRP-445-BMA-HV?
The Maxeon Maxeon 3 410W comes with a 25-year product warranty and 25-year performance guarantee. The Seraphim SRP-445-BMA-HV offers 15-year product and 30-year performance warranties. Maxeon Maxeon 3 410W provides 10 additional years of product coverage.
Which panel performs better in hot weather?
The Maxeon Maxeon 3 410W has a temperature coefficient of -0.27%/°C and the Seraphim SRP-445-BMA-HV is -0.29%/°C. Maxeon Maxeon 3 410W retains more power in heat — important in states like Arizona, Texas, and Florida. A lower (less negative) temperature coefficient is better.
How many Maxeon Maxeon 3 410W vs Seraphim SRP-445-BMA-HV panels do I need for an 8 kW system?
For an 8 kW system: you need 20 Maxeon Maxeon 3 410W panels (410W each) or 18 Seraphim SRP-445-BMA-HV panels (445W each). The Seraphim SRP-445-BMA-HV requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026