Pylontech Force-H2 vs HomeGrid Stack'd Series 28.8kWh
The HomeGrid Stack'd Series 28.8kWh wins this battery comparison by a decisive margin. It delivers 28.8 kWh of usable storage with 25.8 kW continuous output and a 6,000-cycle rating. The 22.1 kWh capacity advantage provides 29 additional hours of essential-load backup.
Key Differences
- • HomeGrid Stack'd Series 28.8kWh provides 28.8 kWh vs 6.75 kWh usable capacity.
- • HomeGrid Stack'd Series 28.8kWh achieves 96% round-trip efficiency vs 95%.
Specifications Breakdown
Usable Storage Capacity
The Pylontech Force-H2 provides 6.75 kWh of usable capacity (7.1 kWh total, 95% DoD), while the HomeGrid Stack'd Series 28.8kWh offers 28.8 kWh usable (28.8 kWh total, 100% DoD). At an average essential-load consumption rate of 750 watts, the Pylontech Force-H2 provides approximately 9.0 hours of backup versus 38.4 hours for the HomeGrid Stack'd Series 28.8kWh. The HomeGrid Stack'd Series 28.8kWh's 22.1 kWh capacity advantage translates to roughly 29 additional hours of essential-load backup during a grid outage. The Pylontech Force-H2 is scalable up to 12 units (81 kWh total), while the HomeGrid Stack'd Series 28.8kWh scales up to 15 units (432 kWh total).
Power Output
The Pylontech Force-H2 delivers 3.55 kW continuous and 7.1 kW peak power, while the HomeGrid Stack'd Series 28.8kWh provides 25.8 kW continuous and 40 kW peak. The HomeGrid Stack'd Series 28.8kWh's higher continuous output means it can simultaneously power more demanding appliances during an outage. A central air conditioner typically draws 3-5 kW, a refrigerator 0.1-0.2 kW, and an EV Level 2 charger 7-11 kW. Peak power rating matters for motor-driven loads with high startup current, such as air conditioners, well pumps, and sump pumps. The HomeGrid Stack'd Series 28.8kWh's 40 kW peak is capable of starting most residential HVAC systems.
Battery Chemistry & Cycle Life
The Pylontech Force-H2 uses LFP chemistry with a rated cycle life of 6,000 cycles (approximately 16.4 years of daily cycling), while the HomeGrid Stack'd Series 28.8kWh uses LFP with 6,000 cycles (approximately 16.4 years). Both use LFP chemistry, which is considered the gold standard for residential energy storage due to its inherent safety, long cycle life, and environmental friendliness. Identical cycle ratings mean both batteries have the same expected operational lifespan under daily cycling.
Round-Trip Efficiency
The Pylontech Force-H2 achieves 95% round-trip efficiency versus 96% for the HomeGrid Stack'd Series 28.8kWh. This means for every 10 kWh of solar energy stored in the HomeGrid Stack'd Series 28.8kWh, 9.6 kWh is recoverable, compared to 9.5 kWh for the other. Over 10 years of daily cycling with 15 kWh average daily throughput, the more efficient battery saves approximately $82 in energy that would otherwise be lost as heat (at $0.15/kWh average retail rate). Higher round-trip efficiency is especially valuable in time-of-use rate environments where you are storing cheap off-peak energy for expensive peak-hour consumption.
Warranty & Long-Term Protection
The Pylontech Force-H2 carries a 10-year warranty, while the HomeGrid Stack'd Series 28.8kWh offers 10 years. Both offer identical warranty duration. Battery warranties typically guarantee the unit will retain 60-70% of original capacity by end of warranty, so the length of coverage directly impacts your financial risk over the system's lifetime.
Specification Comparison
| Specification | Pylontech Force-H2 | HomeGrid Stack'd Series 28.8kWh |
|---|---|---|
| Capacity | 7.1 kWh | 28.8 kWh |
| Usable Capacity | 6.75 kWh | 28.8 kWh |
| Power Output | 3.55 kW | 25.8 kW |
| Chemistry | LFP (Lithium Iron Phosphate) | LFP (Lithium Iron Phosphate) |
| Efficiency | 95% | 96% |
| Cycle Life | 6,000 | 6,000 |
| Weight | 82 kg | 206 kg |
| Warranty | 10 years | 10 years |
| Scalable | Yes | Yes |
5-Dimension Head-to-Head Analysis
1. Storage Capacity
Winner: HomeGrid Stack'd Series 28.8kWhThe HomeGrid Stack'd Series 28.8kWh provides 28.8 kWh versus 6.75 kWh — 22.1 kWh more usable storage. At typical essential-load consumption of 0.75 kW, this equals approximately 29 additional hours of backup power. This is a substantial capacity gap.
2. Power Output
Winner: HomeGrid Stack'd Series 28.8kWhThe HomeGrid Stack'd Series 28.8kWh delivers 25.8 kW continuous versus 3.55 kW. This is enough to run a central AC unit, refrigerator, and general household loads simultaneously. The 22.3 kW power gap significantly impacts what appliances you can run during outages.
3. Chemistry & Longevity
Winner: TieBoth use LFP chemistry with identical 6,000-cycle ratings. LFP chemistry provides excellent thermal stability, long cycle life, and no cobalt dependency.
4. Round-Trip Efficiency
Winner: HomeGrid Stack'd Series 28.8kWhThe HomeGrid Stack'd Series 28.8kWh achieves 96% round-trip efficiency versus 95%. Over 10 years of daily cycling with 15 kWh throughput per day, the more efficient battery saves approximately 82 dollars in energy that would otherwise be lost as heat (at $0.15/kWh). The difference is moderate but compounds over the battery's lifespan.
5. Warranty Coverage
Winner: TieBoth carry 10-year warranties — equal long-term manufacturer protection.
Pylontech Force-H2
The Pylontech Force-H2 is a high-voltage battery system starting at 7.1 kWh per stack (2 modules + BMS). Each module adds 3.55 kWh, and up to 4 modules per stack bring capacity to 14.2 kWh. Multiple stacks can be paralleled for up to 85.2 kWh. The high-voltage design (96-384V) pairs with compatible hybrid inverters.
Pros
- + High-voltage design reduces cable losses for large systems
- + Highly scalable from 7.1 to 85.2 kWh across multiple stacks
- + 95% depth of discharge maximizes usable capacity
- + 6,000 cycle LFP chemistry at competitive pricing
Cons
- - Indoor-only installation restricts placement options
- - Minimum 2-module stack — no small entry point
- - More complex installation than 48V plug-and-play systems
HomeGrid Stack'd Series 28.8kWh
The HomeGrid Stack'd Series 28.8kWh uses 6 modules for a full day of storage for average US households. With 25.8 kW continuous power output, it handles whole-home backup including HVAC, EV charging, and high-draw appliances simultaneously.
Pros
- + 28.8 kWh covers a full day of average US household consumption
- + 25.8 kW continuous output handles any residential load scenario
- + Tool-free modular design — no inter-module wiring needed
- + UL 9540 and UL 9540A fire safety certified
Cons
- - 206kg requires dedicated floor space and structural support
- - High upfront cost for full 6-module configuration
- - 48V architecture means very high current at full power output
Choose Pylontech Force-H2 If...
- ✓ Larger residential and small commercial installations using high-voltage hybrid inverters
Choose HomeGrid Stack'd Series 28.8kWh If...
- ✓ You need more backup storage to cover overnight consumption or extended outages
- ✓ You need to power demanding appliances (AC, EV charger) simultaneously during outages
- ✓ You want to minimize energy losses during daily charge/discharge cycling
- ✓ You want the flexibility to expand storage capacity over time (up to 15 units)
- ✓ Whole-home backup and energy independence with high power demands
Our Recommendation
The HomeGrid Stack'd Series 28.8kWh is the decisive winner in this battery comparison, outperforming the Pylontech Force-H2 in 3 of 5 dimensions. Unless you have a specific requirement that the Pylontech Force-H2 uniquely addresses, the HomeGrid Stack'd Series 28.8kWh is the stronger choice for virtually every installation scenario.
Frequently Asked Questions
Which is better, Pylontech Force-H2 or HomeGrid Stack'd Series 28.8kWh?
The HomeGrid Stack'd Series 28.8kWh wins this battery comparison by a decisive margin. It delivers 28.8 kWh of usable storage with 25.8 kW continuous output and a 6,000-cycle rating. The 22.1 kWh capacity advantage provides 29 additional hours of essential-load backup.
Which battery lasts longer?
The Pylontech Force-H2 is rated for 6,000 cycles versus 6,000 for the HomeGrid Stack'd Series 28.8kWh. Both have identical expected cycle life. LFP chemistry generally outlasts NMC in cycle life testing.
Which battery provides more backup power?
The Pylontech Force-H2 provides 3.55 kW continuous (7.1 kW peak) versus 25.8 kW continuous (40 kW peak) for the HomeGrid Stack'd Series 28.8kWh. HomeGrid Stack'd Series 28.8kWh can run more appliances simultaneously during an outage. A central AC typically needs 3-5 kW, a refrigerator 0.2 kW, and an EV charger 7-11 kW.
Can I expand Pylontech Force-H2 or HomeGrid Stack'd Series 28.8kWh storage later?
Pylontech Force-H2: Yes, up to 12 units for 81 kWh total. HomeGrid Stack'd Series 28.8kWh: Yes, up to 15 units for 432 kWh total. HomeGrid Stack'd Series 28.8kWh offers more expansion potential.
Which battery chemistry is safer?
Both use LFP (Lithium Iron Phosphate) chemistry, which is the safest lithium battery chemistry for residential use. LFP does not undergo thermal runaway, uses no cobalt, and is inherently stable.
Related Resources
Last updated: February 2026