Silfab SIL-410-BG 410W vs First Solar Series 6 Plus 465W
The Silfab SIL-410-BG 410W wins this comparison by a decisive margin. It leads in efficiency (21.2% vs 19.2%) and matches or exceeds on warranty (25 vs 10 years). For most residential installations, the Silfab SIL-410-BG 410W is the stronger choice.
Key Differences
- • Silfab SIL-410-BG 410W is rated at 410W while First Solar Series 6 Plus 465W is rated at 465W, a 55W difference.
- • Silfab SIL-410-BG 410W achieves 21.2% efficiency vs 19.2% for the other, a 2.0 percentage point gap.
- • Silfab SIL-410-BG 410W comes with a 25-year product warranty vs 10 years for the other.
- • First Solar Series 6 Plus 465W has a superior temperature coefficient of -0.28%/°C vs -0.34%/°C, retaining more power in hot climates.
- • Silfab SIL-410-BG 410W uses PERC Mono cells while First Solar Series 6 Plus 465W uses CdTe (Cadmium Telluride) cells, representing different technology generations.
Specifications Breakdown
Module Efficiency
The Silfab SIL-410-BG 410W achieves 21.2% module efficiency compared to First Solar Series 6 Plus 465W's 19.2%, meaning Silfab SIL-410-BG 410W converts 2.0 percentage points more sunlight into electricity per square meter. In practical terms, the Silfab SIL-410-BG 410W produces 210.0 watts per square meter of panel area while the First Solar Series 6 Plus 465W produces 187.9 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The First Solar Series 6 Plus 465W delivers 465W per panel versus 410W for the Silfab SIL-410-BG 410W, a 55W difference per module. To build an 8 kW residential system, you would need 20 Silfab SIL-410-BG 410W panels or 18 First Solar Series 6 Plus 465W panels. Choosing the higher-wattage option saves 2 panels, reducing total racking hardware, wiring, and installation labor costs. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
The First Solar Series 6 Plus 465W has a temperature coefficient of -0.28%/°C versus -0.34%/°C for the Silfab SIL-410-BG 410W. On a hot summer day when cell temperature reaches 65°C (40°C above the 25°C STC baseline), the First Solar Series 6 Plus 465W retains 94.4% of its rated power while the other retains 93.2%. This difference is particularly significant in hot climates such as the American Southwest, the Middle East, and Southeast Asia, where panels routinely operate 30-40°C above STC for several hours each day. Over the system lifetime, the cumulative energy advantage from a better temperature coefficient can amount to 2-4% of total production.
Warranty Coverage
The Silfab SIL-410-BG 410W is backed by a 25-year product warranty and 30-year performance guarantee, while the First Solar Series 6 Plus 465W offers 10-year product and 30-year performance coverage. The Silfab SIL-410-BG 410W provides 15 additional years of defect protection, covering manufacturing issues, material failures, and premature performance loss. Based on their published degradation rates (1% first year then 0.4%/year for Silfab SIL-410-BG 410W; 1.5% first year then 0.5%/year for First Solar Series 6 Plus 465W), after 25 years the Silfab SIL-410-BG 410W should retain approximately 89.4% of original output versus 86.5% for the First Solar Series 6 Plus 465W. This 2.9 percentage point gap in end-of-life output meaningfully impacts lifetime energy economics.
Physical Dimensions & Weight
The Silfab SIL-410-BG 410W measures 1722×1134×30mm and weighs 21 kg, while the First Solar Series 6 Plus 465W measures 2009×1232×49mm at 34.5 kg. 1.95 m² of panel area for the Silfab SIL-410-BG 410W versus 2.48 m² for the First Solar Series 6 Plus 465W. The Silfab SIL-410-BG 410W is 13.5 kg lighter per panel, which reduces structural load requirements on the roof and makes handling easier during installation. For a 20-panel system, that is a total weight difference of 270 kg. The more compact Silfab SIL-410-BG 410W may be easier to fit on irregularly shaped or space-limited rooftops.
Specification Comparison
| Specification | Silfab SIL-410-BG 410W | First Solar Series 6 Plus 465W |
|---|---|---|
| Power | 410W | 465W |
| Efficiency | 21.2% | 19.2% |
| Power Density | 19.5 W/sq ft | 17.5 W/sq ft |
| Cell Type | PERC Mono | CdTe (Cadmium Telluride) |
| Bifacial | No | No |
| Weight | 21 kg | 34.5 kg |
| Temp Coefficient | -0.34%/°C | -0.28%/°C |
| Snow Load | 5400 Pa | 5400 Pa |
| Wind Load | 2400 Pa | 4000 Pa |
| Product Warranty | 25 years | 10 years |
| Performance Warranty | 30 years | 30 years |
| Degradation (Year 1) | 1% | 1.5% |
| Annual Degradation | 0.4% | 0.5% |
| Country | United States | United States |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: Silfab SIL-410-BG 410WThe Silfab SIL-410-BG 410W achieves 21.2% efficiency versus 19.2% — a 2.0 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 1.6 kW more total system capacity, or 8 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: First Solar Series 6 Plus 465WThe First Solar Series 6 Plus 465W has a better temperature coefficient of -0.28%/°C versus -0.34%/°C. On a 45°C summer day (20°C above STC), the winner retains 94.4% of rated power versus 93.2%. This is a meaningful difference in hot states like Arizona, Texas, and Florida.
3. Durability & Warranty
Winner: Silfab SIL-410-BG 410WSilfab SIL-410-BG 410W leads with a 25-year product warranty versus 10 years. Silfab SIL-410-BG 410W degrades more slowly at 0.4% per year versus 0.5%. After 25 years, expect 89.4% vs 86.5% of original output for Silfab SIL-410-BG 410W and First Solar Series 6 Plus 465W respectively.
4. Power Output
Winner: First Solar Series 6 Plus 465WThe First Solar Series 6 Plus 465W delivers 465W versus 410W per panel — 55W more. For an 8 kW system, you need 18 panels with the higher-wattage option versus 20 panels, saving 2 panels and the associated racking and labor costs.
5. Cell Technology
Winner: First Solar Series 6 Plus 465WThe Silfab SIL-410-BG 410W uses PERC Mono: PERC (Passivated Emitter Rear Cell) is the current mainstream technology, offering good efficiency at the lowest manufacturing cost. The First Solar Series 6 Plus 465W uses CdTe (Cadmium Telluride): CdTe (Cadmium Telluride). CdTe (Cadmium Telluride) represents a newer generation technology with a longer performance runway as manufacturing matures.
Silfab SIL-410-BG 410W
The SIL-410-BG is Silfab's all-black residential PERC panel offering 410W with US manufacturing and a 25-year warranty.
Pros
- + US manufactured
- + All-black aesthetics
- + 25-year warranty
- + ARRA compliant
Cons
- - Standard PERC efficiency
- - Higher cost per watt
- - Limited model range
First Solar Series 6 Plus 465W
The Series 6 Plus delivers 465W using First Solar's proven CdTe thin-film technology, manufactured in the United States.
Pros
- + Proven US thin-film technology
- + Excellent temperature coefficient
- + Environmentally responsible
- + Strong bankability
Cons
- - Lower efficiency
- - Very heavy panel
- - Not suitable for residential
Choose Silfab SIL-410-BG 410W If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ Long-term warranty protection is a top priority and you plan to stay in your home for 25+ years
- ✓ You want maximum output retention over the system's 25-30 year lifespan
- ✓ Homeowners wanting US-made, all-black panels with Buy America compliance.
Choose First Solar Series 6 Plus 465W If...
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ You live in a hot climate (Arizona, Texas, Florida) where heat performance matters
- ✓ Large commercial and utility projects wanting proven US thin-film technology.
Our Recommendation
The Silfab SIL-410-BG 410W is the decisive winner in this solar panel comparison, outperforming the First Solar Series 6 Plus 465W in 2 of 5 dimensions. Unless you have a specific requirement that the First Solar Series 6 Plus 465W uniquely addresses, the Silfab SIL-410-BG 410W is the stronger choice for virtually every installation scenario.
Frequently Asked Questions
Which is better, Silfab SIL-410-BG 410W or First Solar Series 6 Plus 465W?
The Silfab SIL-410-BG 410W wins this comparison by a decisive margin. It leads in efficiency (21.2% vs 19.2%) and matches or exceeds on warranty (25 vs 10 years). For most residential installations, the Silfab SIL-410-BG 410W is the stronger choice.
Which panel is more efficient, Silfab SIL-410-BG 410W or First Solar Series 6 Plus 465W?
The Silfab SIL-410-BG 410W at 21.2% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 2.0 percentage points translates to approximately 55W per panel under standard test conditions.
Which has a better warranty, Silfab SIL-410-BG 410W or First Solar Series 6 Plus 465W?
The Silfab SIL-410-BG 410W comes with a 25-year product warranty and 30-year performance guarantee. The First Solar Series 6 Plus 465W offers 10-year product and 30-year performance warranties. Silfab SIL-410-BG 410W provides 15 additional years of product coverage.
Which panel performs better in hot weather?
The Silfab SIL-410-BG 410W has a temperature coefficient of -0.34%/°C and the First Solar Series 6 Plus 465W is -0.28%/°C. First Solar Series 6 Plus 465W retains more power in heat — important in states like Arizona, Texas, and Florida. A lower (less negative) temperature coefficient is better.
How many Silfab SIL-410-BG 410W vs First Solar Series 6 Plus 465W panels do I need for an 8 kW system?
For an 8 kW system: you need 20 Silfab SIL-410-BG 410W panels (410W each) or 18 First Solar Series 6 Plus 465W panels (465W each). The First Solar Series 6 Plus 465W requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026