Silfab SIL-500-NX 500W vs Astronergy ASTRO N7 580W
The Silfab SIL-500-NX 500W wins this comparison by a clear margin. It offers better long-term durability with 25-year warranty. For most residential installations, the Silfab SIL-500-NX 500W is the stronger choice.
Key Differences
- • Silfab SIL-500-NX 500W is rated at 500W while Astronergy ASTRO N7 580W is rated at 580W, a 80W difference.
- • Astronergy ASTRO N7 580W achieves 22.4% efficiency vs 21.8% for the other, a 0.6 percentage point gap.
- • Silfab SIL-500-NX 500W comes with a 25-year product warranty vs 15 years for the other.
Specifications Breakdown
Module Efficiency
The Astronergy ASTRO N7 580W achieves 22.4% module efficiency compared to Silfab SIL-500-NX 500W's 21.8%, meaning Astronergy ASTRO N7 580W converts 0.6 percentage points more sunlight into electricity per square meter. In practical terms, the Silfab SIL-500-NX 500W produces 210.6 watts per square meter of panel area while the Astronergy ASTRO N7 580W produces 224.5 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The Astronergy ASTRO N7 580W delivers 580W per panel versus 500W for the Silfab SIL-500-NX 500W, a 80W difference per module. To build an 8 kW residential system, you would need 16 Silfab SIL-500-NX 500W panels or 14 Astronergy ASTRO N7 580W panels. Choosing the higher-wattage option saves 2 panels, reducing total racking hardware, wiring, and installation labor costs. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
Both panels share an identical temperature coefficient of -0.29%/°C, meaning they lose power at the same rate as cell temperature rises above the 25°C standard test baseline. At 65°C cell temperature, both retain 94.2% of rated power. Neither panel has a thermal performance advantage, which makes this specification a non-factor in the comparison.
Warranty Coverage
The Silfab SIL-500-NX 500W is backed by a 25-year product warranty and 30-year performance guarantee, while the Astronergy ASTRO N7 580W offers 15-year product and 30-year performance coverage. The Silfab SIL-500-NX 500W provides 10 additional years of defect protection, covering manufacturing issues, material failures, and premature performance loss. Based on their published degradation rates (1% first year then 0.4%/year for Silfab SIL-500-NX 500W; 1% first year then 0.4%/year for Astronergy ASTRO N7 580W), after 25 years the Silfab SIL-500-NX 500W should retain approximately 89.4% of original output versus 89.4% for the Astronergy ASTRO N7 580W. The end-of-life output levels are closely matched.
Physical Dimensions & Weight
The Silfab SIL-500-NX 500W measures 2094×1134×30mm and weighs 25.5 kg, while the Astronergy ASTRO N7 580W measures 2278×1134×35mm at 28.5 kg. 2.37 m² of panel area for the Silfab SIL-500-NX 500W versus 2.58 m² for the Astronergy ASTRO N7 580W. The Silfab SIL-500-NX 500W is 3.0 kg lighter per panel, which reduces structural load requirements on the roof and makes handling easier during installation. For a 20-panel system, that is a total weight difference of 60 kg. The more compact Silfab SIL-500-NX 500W may be easier to fit on irregularly shaped or space-limited rooftops.
Specification Comparison
| Specification | Silfab SIL-500-NX 500W | Astronergy ASTRO N7 580W |
|---|---|---|
| Power | 500W | 580W |
| Efficiency | 21.8% | 22.4% |
| Power Density | 19.6 W/sq ft | 20.9 W/sq ft |
| Cell Type | TOPCon N-type | TOPCon N-type |
| Bifacial | No | Yes |
| Weight | 25.5 kg | 28.5 kg |
| Temp Coefficient | -0.29%/°C | -0.29%/°C |
| Snow Load | 5400 Pa | 5400 Pa |
| Wind Load | 2400 Pa | 2400 Pa |
| Product Warranty | 25 years | 15 years |
| Performance Warranty | 30 years | 30 years |
| Degradation (Year 1) | 1% | 1% |
| Annual Degradation | 0.4% | 0.4% |
| Country | United States | China |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: Astronergy ASTRO N7 580WThe Astronergy ASTRO N7 580W achieves 22.4% efficiency versus 21.8% — a 0.6 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 2.4 kW more total system capacity, or 11 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: TieBoth panels share a temperature coefficient of -0.29%/°C — identical heat tolerance.
3. Durability & Warranty
Winner: Silfab SIL-500-NX 500WSilfab SIL-500-NX 500W leads with a 25-year product warranty versus 15 years. After 25 years, expect 89.4% vs 89.4% of original output for Silfab SIL-500-NX 500W and Astronergy ASTRO N7 580W respectively.
4. Power Output
Winner: Astronergy ASTRO N7 580WThe Astronergy ASTRO N7 580W delivers 580W versus 500W per panel — 80W more. For an 8 kW system, you need 14 panels with the higher-wattage option versus 16 panels, saving 2 panels and the associated racking and labor costs.
5. Cell Technology
Winner: TieBoth panels use TOPCon N-type cell technology. No technology advantage for either product.
Silfab SIL-500-NX 500W
Silfab SIL-500-NX is a US-manufactured N-type TOPCon panel delivering 500W with domestic production benefits and a 25-year warranty.
Pros
- + Made in USA
- + 25-year product warranty
- + N-type TOPCon technology
- + Strong domestic support
Cons
- - Higher cost than imports
- - Moderate efficiency
- - Limited brand awareness
Astronergy ASTRO N7 580W
Astronergy ASTRO N7 delivers 580W with TOPCon N-type technology, backed by CHINT Group's manufacturing scale and reliability.
Pros
- + High 580W output
- + N-type TOPCon efficiency
- + Strong manufacturing backing
- + Competitive pricing
Cons
- - Less known brand in US
- - Limited installer network
- - Large form factor
Choose Silfab SIL-500-NX 500W If...
- ✓ Long-term warranty protection is a top priority and you plan to stay in your home for 25+ years
- ✓ You prefer newer cell technology with a longer performance improvement runway
- ✓ Homeowners prioritizing US-made solar panels with strong domestic warranty.
Choose Astronergy ASTRO N7 580W If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ You prefer newer cell technology with a longer performance improvement runway
- ✓ Large residential and commercial systems seeking competitive N-type pricing.
Our Recommendation
We recommend the Silfab SIL-500-NX 500W for most buyers in this comparison. It wins 1 of 5 key dimensions and offers a clear advantage in the metrics that matter most for a solar panel purchase. The Astronergy ASTRO N7 580W remains a good product, but the Silfab SIL-500-NX 500W delivers better overall value for the majority of installations.
Frequently Asked Questions
Which is better, Silfab SIL-500-NX 500W or Astronergy ASTRO N7 580W?
The Silfab SIL-500-NX 500W wins this comparison by a clear margin. It offers better long-term durability with 25-year warranty. For most residential installations, the Silfab SIL-500-NX 500W is the stronger choice.
Which panel is more efficient, Silfab SIL-500-NX 500W or Astronergy ASTRO N7 580W?
The Astronergy ASTRO N7 580W at 22.4% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 0.6 percentage points translates to approximately 80W per panel under standard test conditions.
Which has a better warranty, Silfab SIL-500-NX 500W or Astronergy ASTRO N7 580W?
The Silfab SIL-500-NX 500W comes with a 25-year product warranty and 30-year performance guarantee. The Astronergy ASTRO N7 580W offers 15-year product and 30-year performance warranties. Silfab SIL-500-NX 500W provides 10 additional years of product coverage.
Which panel performs better in hot weather?
The Silfab SIL-500-NX 500W has a temperature coefficient of -0.29%/°C and the Astronergy ASTRO N7 580W is -0.29%/°C. Both handle heat equally. A lower (less negative) temperature coefficient is better.
How many Silfab SIL-500-NX 500W vs Astronergy ASTRO N7 580W panels do I need for an 8 kW system?
For an 8 kW system: you need 16 Silfab SIL-500-NX 500W panels (500W each) or 14 Astronergy ASTRO N7 580W panels (580W each). The Astronergy ASTRO N7 580W requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026