Silfab SIL-500-NX 500W vs LONGi Hi-MO X6 Max 470W
The Silfab SIL-500-NX 500W wins this comparison by a decisive margin. It delivers more power (500W vs 470W). For most residential installations, the Silfab SIL-500-NX 500W is the stronger choice.
Key Differences
- • Silfab SIL-500-NX 500W is rated at 500W while LONGi Hi-MO X6 Max 470W is rated at 470W, a 30W difference.
- • LONGi Hi-MO X6 Max 470W achieves 22.3% efficiency vs 21.8% for the other, a 0.5 percentage point gap.
- • Silfab SIL-500-NX 500W comes with a 25-year product warranty vs 15 years for the other.
Specifications Breakdown
Module Efficiency
The LONGi Hi-MO X6 Max 470W achieves 22.3% module efficiency compared to Silfab SIL-500-NX 500W's 21.8%, meaning LONGi Hi-MO X6 Max 470W converts 0.5 percentage points more sunlight into electricity per square meter. In practical terms, the Silfab SIL-500-NX 500W produces 210.6 watts per square meter of panel area while the LONGi Hi-MO X6 Max 470W produces 235.2 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The Silfab SIL-500-NX 500W delivers 500W per panel versus 470W for the LONGi Hi-MO X6 Max 470W, a 30W difference per module. To build an 8 kW residential system, you would need 16 Silfab SIL-500-NX 500W panels or 18 LONGi Hi-MO X6 Max 470W panels. Choosing the higher-wattage option saves 2 panels, reducing total racking hardware, wiring, and installation labor costs. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
Both panels share an identical temperature coefficient of -0.29%/°C, meaning they lose power at the same rate as cell temperature rises above the 25°C standard test baseline. At 65°C cell temperature, both retain 94.2% of rated power. Neither panel has a thermal performance advantage, which makes this specification a non-factor in the comparison.
Warranty Coverage
The Silfab SIL-500-NX 500W is backed by a 25-year product warranty and 30-year performance guarantee, while the LONGi Hi-MO X6 Max 470W offers 15-year product and 30-year performance coverage. The Silfab SIL-500-NX 500W provides 10 additional years of defect protection, covering manufacturing issues, material failures, and premature performance loss. Based on their published degradation rates (1% first year then 0.4%/year for Silfab SIL-500-NX 500W; 1% first year then 0.4%/year for LONGi Hi-MO X6 Max 470W), after 25 years the Silfab SIL-500-NX 500W should retain approximately 89.4% of original output versus 89.4% for the LONGi Hi-MO X6 Max 470W. The end-of-life output levels are closely matched.
Physical Dimensions & Weight
The Silfab SIL-500-NX 500W measures 2094×1134×30mm and weighs 25.5 kg, while the LONGi Hi-MO X6 Max 470W measures 1762×1134×30mm at 23.5 kg. 2.37 m² of panel area for the Silfab SIL-500-NX 500W versus 2.00 m² for the LONGi Hi-MO X6 Max 470W. The LONGi Hi-MO X6 Max 470W is 2.0 kg lighter per panel, which reduces structural load requirements on the roof and makes handling easier during installation. For a 20-panel system, that is a total weight difference of 40 kg. The more compact LONGi Hi-MO X6 Max 470W may be easier to fit on irregularly shaped or space-limited rooftops.
Specification Comparison
| Specification | Silfab SIL-500-NX 500W | LONGi Hi-MO X6 Max 470W |
|---|---|---|
| Power | 500W | 470W |
| Efficiency | 21.8% | 22.3% |
| Power Density | 19.6 W/sq ft | 21.9 W/sq ft |
| Cell Type | TOPCon N-type | TOPCon N-type |
| Bifacial | No | Yes |
| Weight | 25.5 kg | 23.5 kg |
| Temp Coefficient | -0.29%/°C | -0.29%/°C |
| Snow Load | 5400 Pa | 5400 Pa |
| Wind Load | 2400 Pa | 2400 Pa |
| Product Warranty | 25 years | 15 years |
| Performance Warranty | 30 years | 30 years |
| Degradation (Year 1) | 1% | 1% |
| Annual Degradation | 0.4% | 0.4% |
| Country | United States | China |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: LONGi Hi-MO X6 Max 470WThe LONGi Hi-MO X6 Max 470W achieves 22.3% efficiency versus 21.8% — a 0.5 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 0.9 kW more total system capacity, or 5 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: TieBoth panels share a temperature coefficient of -0.29%/°C — identical heat tolerance.
3. Durability & Warranty
Winner: Silfab SIL-500-NX 500WSilfab SIL-500-NX 500W leads with a 25-year product warranty versus 15 years. After 25 years, expect 89.4% vs 89.4% of original output for Silfab SIL-500-NX 500W and LONGi Hi-MO X6 Max 470W respectively.
4. Power Output
Winner: Silfab SIL-500-NX 500WThe Silfab SIL-500-NX 500W delivers 500W versus 470W per panel — 30W more. For an 8 kW system, you need 16 panels with the higher-wattage option versus 18 panels, saving 2 panels and the associated racking and labor costs.
5. Cell Technology
Winner: TieBoth panels use TOPCon N-type cell technology. No technology advantage for either product.
Silfab SIL-500-NX 500W
Silfab SIL-500-NX is a US-manufactured N-type TOPCon panel delivering 500W with domestic production benefits and a 25-year warranty.
Pros
- + Made in USA
- + 25-year product warranty
- + N-type TOPCon technology
- + Strong domestic support
Cons
- - Higher cost than imports
- - Moderate efficiency
- - Limited brand awareness
LONGi Hi-MO X6 Max 470W
The Hi-MO X6 Max delivers 470W in a mid-size format with N-type TOPCon technology, bridging the gap between compact and large panels.
Pros
- + Mid-size versatility
- + N-type TOPCon efficiency
- + Good power-to-size ratio
- + LONGi reliability
Cons
- - Mid-range pricing
- - Not the highest output
- - Standard warranty
Choose Silfab SIL-500-NX 500W If...
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ Long-term warranty protection is a top priority and you plan to stay in your home for 25+ years
- ✓ You prefer newer cell technology with a longer performance improvement runway
- ✓ Homeowners prioritizing US-made solar panels with strong domestic warranty.
Choose LONGi Hi-MO X6 Max 470W If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ You prefer newer cell technology with a longer performance improvement runway
- ✓ Medium-sized residential roofs wanting a balance of size and N-type performance.
Our Recommendation
The Silfab SIL-500-NX 500W is the decisive winner in this solar panel comparison, outperforming the LONGi Hi-MO X6 Max 470W in 2 of 5 dimensions. Unless you have a specific requirement that the LONGi Hi-MO X6 Max 470W uniquely addresses, the Silfab SIL-500-NX 500W is the stronger choice for virtually every installation scenario.
Frequently Asked Questions
Which is better, Silfab SIL-500-NX 500W or LONGi Hi-MO X6 Max 470W?
The Silfab SIL-500-NX 500W wins this comparison by a decisive margin. It delivers more power (500W vs 470W). For most residential installations, the Silfab SIL-500-NX 500W is the stronger choice.
Which panel is more efficient, Silfab SIL-500-NX 500W or LONGi Hi-MO X6 Max 470W?
The LONGi Hi-MO X6 Max 470W at 22.3% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 0.5 percentage points translates to approximately 30W per panel under standard test conditions.
Which has a better warranty, Silfab SIL-500-NX 500W or LONGi Hi-MO X6 Max 470W?
The Silfab SIL-500-NX 500W comes with a 25-year product warranty and 30-year performance guarantee. The LONGi Hi-MO X6 Max 470W offers 15-year product and 30-year performance warranties. Silfab SIL-500-NX 500W provides 10 additional years of product coverage.
Which panel performs better in hot weather?
The Silfab SIL-500-NX 500W has a temperature coefficient of -0.29%/°C and the LONGi Hi-MO X6 Max 470W is -0.29%/°C. Both handle heat equally. A lower (less negative) temperature coefficient is better.
How many Silfab SIL-500-NX 500W vs LONGi Hi-MO X6 Max 470W panels do I need for an 8 kW system?
For an 8 kW system: you need 16 Silfab SIL-500-NX 500W panels (500W each) or 18 LONGi Hi-MO X6 Max 470W panels (470W each). The Silfab SIL-500-NX 500W requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026