Seraphim SRP-445-BMA-HV vs Aptos Solar DNA-120-MF10 460W
The Aptos Solar DNA-120-MF10 460W wins this comparison by a clear margin. It delivers more power (460W vs 445W). For most residential installations, the Aptos Solar DNA-120-MF10 460W is the stronger choice.
Key Differences
- • Seraphim SRP-445-BMA-HV is rated at 445W while Aptos Solar DNA-120-MF10 460W is rated at 460W, a 15W difference.
- • Seraphim SRP-445-BMA-HV achieves 22% efficiency vs 21.26% for the other, a 0.7 percentage point gap.
- • Aptos Solar DNA-120-MF10 460W comes with a 30-year product warranty vs 15 years for the other.
- • Seraphim SRP-445-BMA-HV has a superior temperature coefficient of -0.29%/°C vs -0.35%/°C, retaining more power in hot climates.
- • Seraphim SRP-445-BMA-HV uses TOPCon N-type cells while Aptos Solar DNA-120-MF10 460W uses PERC Mono cells, representing different technology generations.
Specifications Breakdown
Module Efficiency
The Seraphim SRP-445-BMA-HV achieves 22% module efficiency compared to Aptos Solar DNA-120-MF10 460W's 21.26%, meaning Seraphim SRP-445-BMA-HV converts 0.7 percentage points more sunlight into electricity per square meter. In practical terms, the Seraphim SRP-445-BMA-HV produces 227.9 watts per square meter of panel area while the Aptos Solar DNA-120-MF10 460W produces 212.6 W/m². For rooftop installations where space is limited, this efficiency gap determines how many kilowatts you can fit on your available roof area. Over a 25-year system life, even a small efficiency advantage compounds into meaningful additional energy production.
Power Output
The Aptos Solar DNA-120-MF10 460W delivers 460W per panel versus 445W for the Seraphim SRP-445-BMA-HV, a 15W difference per module. To build an 8 kW residential system, you would need 18 Seraphim SRP-445-BMA-HV panels or 18 Aptos Solar DNA-120-MF10 460W panels. Despite the per-panel wattage difference, both require the same number of panels for this system size due to rounding. Higher wattage per panel is particularly valuable for commercial-scale installations where panel count directly impacts balance-of-system costs.
Temperature Coefficient
The Seraphim SRP-445-BMA-HV has a temperature coefficient of -0.29%/°C versus -0.35%/°C for the Aptos Solar DNA-120-MF10 460W. On a hot summer day when cell temperature reaches 65°C (40°C above the 25°C STC baseline), the Seraphim SRP-445-BMA-HV retains 94.2% of its rated power while the other retains 93.0%. This difference is particularly significant in hot climates such as the American Southwest, the Middle East, and Southeast Asia, where panels routinely operate 30-40°C above STC for several hours each day. Over the system lifetime, the cumulative energy advantage from a better temperature coefficient can amount to 2-4% of total production.
Warranty Coverage
The Seraphim SRP-445-BMA-HV is backed by a 15-year product warranty and 30-year performance guarantee, while the Aptos Solar DNA-120-MF10 460W offers 30-year product and 30-year performance coverage. The Aptos Solar DNA-120-MF10 460W provides 15 additional years of defect protection, covering manufacturing issues, material failures, and premature performance loss. Based on their published degradation rates (1% first year then 0.4%/year for Seraphim SRP-445-BMA-HV; 1% first year then 0.54%/year for Aptos Solar DNA-120-MF10 460W), after 25 years the Seraphim SRP-445-BMA-HV should retain approximately 89.4% of original output versus 86.0% for the Aptos Solar DNA-120-MF10 460W. This 3.4 percentage point gap in end-of-life output meaningfully impacts lifetime energy economics.
Physical Dimensions & Weight
The Seraphim SRP-445-BMA-HV measures 1722×1134×30mm and weighs 21.5 kg, while the Aptos Solar DNA-120-MF10 460W measures 1908×1134×35mm at 24 kg. 1.95 m² of panel area for the Seraphim SRP-445-BMA-HV versus 2.16 m² for the Aptos Solar DNA-120-MF10 460W. The Seraphim SRP-445-BMA-HV is 2.5 kg lighter per panel, which reduces structural load requirements on the roof and makes handling easier during installation. For a 20-panel system, that is a total weight difference of 50 kg. The more compact Seraphim SRP-445-BMA-HV may be easier to fit on irregularly shaped or space-limited rooftops.
Specification Comparison
| Specification | Seraphim SRP-445-BMA-HV | Aptos Solar DNA-120-MF10 460W |
|---|---|---|
| Power | 445W | 460W |
| Efficiency | 22% | 21.26% |
| Power Density | 21.2 W/sq ft | 19.8 W/sq ft |
| Cell Type | TOPCon N-type | PERC Mono |
| Bifacial | No | No |
| Weight | 21.5 kg | 24 kg |
| Temp Coefficient | -0.29%/°C | -0.35%/°C |
| Snow Load | 5400 Pa | 5400 Pa |
| Wind Load | 2400 Pa | 4000 Pa |
| Product Warranty | 15 years | 30 years |
| Performance Warranty | 30 years | 30 years |
| Degradation (Year 1) | 1% | 1% |
| Annual Degradation | 0.4% | 0.54% |
| Country | China | Vietnam |
5-Dimension Head-to-Head Analysis
1. Efficiency & Power Density
Winner: Seraphim SRP-445-BMA-HVThe Seraphim SRP-445-BMA-HV achieves 22% efficiency versus 21.26% — a 0.7 percentage point advantage. On a typical 30-panel residential roof, this translates to approximately 0.5 kW more total system capacity, or 3 kWh more annual production in an average US location.
2. Hot Climate Performance
Winner: Seraphim SRP-445-BMA-HVThe Seraphim SRP-445-BMA-HV has a better temperature coefficient of -0.29%/°C versus -0.35%/°C. On a 45°C summer day (20°C above STC), the winner retains 94.2% of rated power versus 93.0%. This is a meaningful difference in hot states like Arizona, Texas, and Florida.
3. Durability & Warranty
Winner: Aptos Solar DNA-120-MF10 460WAptos Solar DNA-120-MF10 460W leads with a 30-year product warranty versus 15 years. Seraphim SRP-445-BMA-HV degrades more slowly at 0.4% per year versus 0.54%. After 25 years, expect 89.4% vs 86.0% of original output for Seraphim SRP-445-BMA-HV and Aptos Solar DNA-120-MF10 460W respectively.
4. Power Output
Winner: Aptos Solar DNA-120-MF10 460WThe Aptos Solar DNA-120-MF10 460W delivers 460W versus 445W per panel — 15W more. For an 8 kW system, you need 18 panels with the higher-wattage option versus 18 panels, saving 0 panels and the associated racking and labor costs.
5. Cell Technology
Winner: Seraphim SRP-445-BMA-HVThe Seraphim SRP-445-BMA-HV uses TOPCon N-type: TOPCon (Tunnel Oxide Passivated Contact) adds a thin tunnel oxide layer to reduce recombination losses, achieving higher efficiency than PERC while being manufacturable on existing production lines. The Aptos Solar DNA-120-MF10 460W uses PERC Mono: PERC (Passivated Emitter Rear Cell) is the current mainstream technology, offering good efficiency at the lowest manufacturing cost. TOPCon N-type represents a newer generation technology with a longer performance runway as manufacturing matures.
Seraphim SRP-445-BMA-HV
Seraphim SRP-445-BMA-HV is an all-black N-type TOPCon panel delivering 445W with clean aesthetics for residential installations.
Pros
- + All-black aesthetics
- + N-type TOPCon technology
- + Compact residential format
- + Competitive pricing
Cons
- - Less known in US market
- - Limited installer base
- - Standard warranty
Aptos Solar DNA-120-MF10 460W
Aptos Solar DNA-120-MF10 delivers 460W with 120 half-cut PERC cells and 10 ultra-thin busbars for high energy harvest in commercial and large residential systems.
Pros
- + 460W output in a versatile 120-cell format
- + 30-year product and performance warranty
- + 10 ultra-thin busbars reduce resistive loss
- + Competitive price per watt
Cons
- - Larger format may not fit all residential rooftops
- - PERC technology vs newer TOPCon options
- - No bifacial energy gain
Choose Seraphim SRP-445-BMA-HV If...
- ✓ Your roof space is limited and you need maximum power per panel
- ✓ You live in a hot climate (Arizona, Texas, Florida) where heat performance matters
- ✓ You want maximum output retention over the system's 25-30 year lifespan
- ✓ You prefer newer cell technology with a longer performance improvement runway
- ✓ Aesthetics-focused homeowners wanting all-black N-type panels at a good price.
Choose Aptos Solar DNA-120-MF10 460W If...
- ✓ You want fewer panels to reach your target system size, reducing racking and labor costs
- ✓ Long-term warranty protection is a top priority and you plan to stay in your home for 30+ years
- ✓ Commercial installations and large residential systems seeking high wattage with proven PERC technology at competitive pricing.
Our Recommendation
We recommend the Aptos Solar DNA-120-MF10 460W for most buyers in this comparison. It wins 2 of 5 key dimensions and offers a clear advantage in the metrics that matter most for a solar panel purchase. The Seraphim SRP-445-BMA-HV remains a good product, but the Aptos Solar DNA-120-MF10 460W delivers better overall value for the majority of installations.
Frequently Asked Questions
Which is better, Seraphim SRP-445-BMA-HV or Aptos Solar DNA-120-MF10 460W?
The Aptos Solar DNA-120-MF10 460W wins this comparison by a clear margin. It delivers more power (460W vs 445W). For most residential installations, the Aptos Solar DNA-120-MF10 460W is the stronger choice.
Which panel is more efficient, Seraphim SRP-445-BMA-HV or Aptos Solar DNA-120-MF10 460W?
The Seraphim SRP-445-BMA-HV at 22% module efficiency. Higher efficiency means more watts per square foot of roof space, which is critical for space-constrained installations. The difference of 0.7 percentage points translates to approximately 15W per panel under standard test conditions.
Which has a better warranty, Seraphim SRP-445-BMA-HV or Aptos Solar DNA-120-MF10 460W?
The Seraphim SRP-445-BMA-HV comes with a 15-year product warranty and 30-year performance guarantee. The Aptos Solar DNA-120-MF10 460W offers 30-year product and 30-year performance warranties. Aptos Solar DNA-120-MF10 460W provides 15 additional years of product coverage.
Which panel performs better in hot weather?
The Seraphim SRP-445-BMA-HV has a temperature coefficient of -0.29%/°C and the Aptos Solar DNA-120-MF10 460W is -0.35%/°C. Seraphim SRP-445-BMA-HV retains more power in heat — important in states like Arizona, Texas, and Florida. A lower (less negative) temperature coefficient is better.
How many Seraphim SRP-445-BMA-HV vs Aptos Solar DNA-120-MF10 460W panels do I need for an 8 kW system?
For an 8 kW system: you need 18 Seraphim SRP-445-BMA-HV panels (445W each) or 18 Aptos Solar DNA-120-MF10 460W panels (460W each). The Aptos Solar DNA-120-MF10 460W requires fewer panels, saving on racking hardware and installation labor.
Related Resources
Last updated: February 2026